This kit is perfect for a dual battery system setup. Including our 120AH AGM battery, a plug & play wiring kit, dual sensing VSR and LVD.
These Slimline batteries are the key to tight applications in your 4x4 vehicle, caravan or camper-van. They are even suitable for saltwater/marine applications like your boat. With a KICKASS® Battery on the road with you, your power and electricity troubles will become a thing of the past.
Maintenance-Free and Safe: To make life easier for you, KICKASS® Batteries are completely maintenance-free. No more refilling terminals with water; just purchase and reap the benefits.
Safety valve: You can rely on the in-built safety valve to keep you and your family safe by ensuring the battery is completely sealed, preventing any possible battery explosions.
Exceptional Deep Discharge Recovery: High oxygen-recombination efficiency ensures no loss of electrolyte, giving the batteries exceptional deep discharge recovery performance, just in case you accidently discharge your batteries a little too much! This also ensures you will never need to replace electrolyte during the course of the batteries' life.
Durable Plates: High purity, thick lead-calcium alloy plates ensure a long design life span of 8 years (for infrequent discharge @20¡C).
Corrosion resistant: Lead-calcium grids maintain a low self-discharge rate of approximately 3% of capacity per month.
Quality copper-silver terminals: Small contact resistance and high corrosion resistance.
*Please note use of this battery under your bonnet, to power trolling motors or in electric golf buggies will void your warranty. More suitable battery types for these applications are CCA rated batteries.
Carefully designed for easy DIY fitting these kits use high quality trade grade components so you can be on par with the pros for your wiring installations.
These kits are completely plug and play for any system that uses Anderson connectors for charging input and have everything you need for a professional wiring solution. Our Maxi Fuse cable included in this kit makes it very easy to connect to the start battery, provides 80A circuit protection and has an inline 50A Anderson connector. This seamlessly connects to the included KICKASS® Dual Sensing VSR with Anderson style connectors for ultra easy installation.
A huge 6 meters of heavy duty twin sheathed 8 B&S cable is then simply connected to the VSR and ran to the rear of the vehicle. This cable is pre-crimped with Anderson connector terminals which makes it easy to run through holes and grommets. Once the cable is run, all you need to do is clip the Anderson connectors on and connect them to each other. The kit also includes cable ties for securing the main cables, spare 80A Maxi Fuse, spare Anderson connector terminals and a small ring terminal assortment.
The KICKASS® dual battery wiring kit is ideal for installation of:
Tray / Rear Mounted Dual Battery Systems
Caravan / Camper Dual Battery Systems
KICKASS® have taken the hassle out of installing an LVD to your 12V system!
Protect your valuable batteries from over-discharge with this simple-to-install system with Anderson style connectors. You no longer have to hardwire an LVD unit into your system.
Once connected, the LVD will allow output power to run your load as normal. The LED status will indicate what state of charge the battery is at while discharging. The device will cut out at 11 Volts which will protect your battery from over-discharge. To reconnect the device, the LVD needs to sense 13 Volts to ensure that the battery has accepted charge before the load is reconnected.
3 WAY SWITCH SETTINGS
NORMAL - The LVD device will disconnect and isolate the load from the battery at 11 Volts. Once the LVD senses 11 Volts, the Low Voltage Alarm will sound for 60 seconds before disconnecting. To reconnect the device once it has been disconnected, the LVD needs to sense 13 Volts before the load will connect to the battery again.
ALARM MUTE - This function is to manually mute the low voltage alarm if required. On this setting the LVD will still operate the same as ‘Normal Mode’ but the low voltage alarm will not sound.
OVERRIDE - This function is to manually override the LVD sensing and will simply connect the battery to the load without the protection of cutting out. This feature should only be used in Emergency situations when required.
This fantastic kit includes the following Quality Components:
Click here to download Warranty & Critical Information Summary
Click here to download VSR Product Manual
Click here to download LVD Product Manual
(Anderson Style Plug Rating)
|Voltage System||12V DC|
Cut In Voltage (Connect Voltage)
|13.20V with 15 second delay|
Cut Out Voltage (Disconnect Voltage)
|12.80V with 15 second delay|
|LED Operation||On - Battery is Connected
Off - Battery is Disconnected
|Operating Temperature||0°C - 50°C|
|Housing Dimensions||110mm x 102mm x 50mm|
|Mounting Hole to Mounting Hole Diameter||L - 49mm / W - 95mm|
5 Year Warranty.Click to read more
Browse Our Top Selling Products
Our Top Sellers