Black 50A High Current Anderson Connector

RRP $29.00
SAVE $18.00 (62%)
In Stock
(SKU : AND50BK)
Buy In Bulk & Save!
Buy 3 to 6: Pay $8.00 ea
Buy 7 to 20: Pay $6.00 ea
Buy 21 to 100: Pay $5.00 ea

Shipping Estimate

Product Description

50A High Current Anderson Style Connector
 

Anderson compatible plug/socket can be used as either a plug or a socket as it is fully insulated and is rated very high at 50 AMPS as well as 600V or DC operation. Made from polycarbonate.
 

The Anderson style connectors are a single-piece housing to provide a cost effective readable quality, durable, and safety. However, you need two sockets to make a connection.
 

**Please NOTE** Black Anderson plugs are interconnectable with Black and Grey Anderson plugs only.
 

These Anderson Plugs are genderless designed and are everything you need to connect your automotive, fridge, or solar panel to your KICKASS® battery by the following instructions:
 

Installation Instructions

PLEASE ENSURE THAT INSTRUCTIONS ARE UNDERSTOOD PRIOR TO FITMENT
 

  1. Use a stripping tool or a stanley knife to carefully strip back the cable sheathing, if it is a twin core cable.

  2. Using a stripping tool, carefully strip back 1 cm of insulation of each single core cable (positive and negative).  

  3. Attach the Anderson connector terminal lugs to the stripped back cable ends. Using a crimping tool, crimp terminal lugs securely onto the cable.

  4. Ensure the terminal lugs are crimped correctly by making sure they are fixed in place and cannot be pulled off.

  5. Making sure the terminal lug lip is facing up, attach the Anderson plug ensuring the positive and negative cables are inserted into their designated side (pos + and neg -).

  6. Push the cables all of the way through until the terminal lug lip latches over the spring clip at the end of the plug and clips in place.

  7. Ensure both cables are fixed in place by carefully pulling each one individually, making sure the latch is over the spring clip and does not pull out of the Anderson plug.
     

*NOTE* To remove the cables from the Anderson plug once installed, use a tool (small flathead screwdriver) to push the spring clip down while pulling the individual cable out the back of the Anderson plug.


Anderson plugs are quick and easy to install and they also reduce the number of parts you need to fiddle with. These plugs come in various colours including: green, yellow, blue, grey and black.

Specifications
Contact Rating 50A
Contact Wire Size 6 AWG
Colour Black
Voltage Rating 600V (AC or DC)
Max Wire Insulation Diameter 11mm
Contact Retention Force 22.7kg
Operating Temperature -20oC to 120oC


Installation Guide

Installation Instructions PLEASE ENSURE THAT INSTRUCTIONS ARE UNDERSTOOD PRIOR TO FITMENT

1. Use a stripping tool or a stanley knife to carefully strip back the cable sheathing, if it is a twin core cable.

2. Using a stripping tool, carefully strip back 1 cm of insulation of each single core cable (positive and negative).

3. Attach the anderson connector terminal lugs to the stripped back cable ends. Using a crimping tool, crimp terminal lugs securely onto the cable.

4. Ensure the terminal lugs are crimped correctly by making sure they are fixed in place and cannot be pulled off.

5. Making sure the terminal lug lip is facing up, attach the anderson plug ensuring the positive and negative cables are inserted into their designated side (pos + and neg -).

6. Push the cables all of the way through until the terminal lug lip latches over the spring clip at the end of the plug and clips in place.

7. Ensure both cables are fixed in place by carefully pulling each one individually, making sure the latch is over the spring clip and does not pull out of the anderson plug.

 

*NOTE* To remove the cables from the anderson plug once installed, use a tool (small flathead screwdriver) to push the spring clip down while pulling the individual cable out the back of the anderson plug.

Product Dimensions
Person Size
Size
Width: 35mm
Length: 50mm
Height: 15mm
Product Warranty
1 Year Warranty, and 30 Days money back guarantee. Click to read more.
Product Reviews

50 amp black Anderson plug

26 July 2018
Saw the video on line about the black Anderson plug for my solar input so fitted it to back of the Kluger to go to the DC to FC charger. Thanks Australian Direct.
(5)