Thumper EXTREME 110Ah with 300W Pure Sine Inverter

Thumper EXTREME Battery Pack 110Ah with built in 300W Pure Sine Inverter

'We listened to our customers and built a unit that has everything'

Offering the same specifications as the regular Thumper Extreme 110AH Battery Pack with the added convenience of a built in 300W Pure Sine inverter. This is the real all in one, out the box solution for the serious off-roader.

The Thumper:

The new range of Thumper Extreme Battery packs reinvent the dual battery system with greater Ah capacity, volt and amp meters, LED indicators and many more exciting features.

Thumper Extreme is the ultimate dual battery system! With it's new extreme cycle heavy duty battery it is perfect for powering your fridge, 12V accessories or jump starting your vehicle.

As well as the original voltmeter the extreme range includes an amp meter which displays both discharge and recharge voltage so you can monitor both the current being drawn from the unit as well as the current being put back in from a solar panel
for example.

Also new with the extreme range is the LED indicator which when green indicates above 50% charge, orange shows below 11.9V and flashing red indicates either overcharge or excessive discharge.

The 110Ah unit has the capability to jumpstart a 10L diesel motor with the included 1.4m heavy duty jumper leads
with Anderson connection.

This model is capable of running 80-110L fridges and recharge in 3 - 4 hours using the 50A Anderson Charge Kit
with Isolator (included).

Internal circuit breakers feature an auto reset function.

All Thumpers are made in South Australia and are fully serviceable.


The Inverter:

This is the ideal inverter for running all your smaller electrical appliances that require ultra clean power. Provide a class leading performance in power efficiency and reliability.

The pure sine wave output produces super clean power which is needed for powering sensitive equipment such as laptops, phone chargers, game consoles, etc. You will be able to watch television without static, listen to AM radio, run a fluoro or power any electrical equipment without the worry of frying your appliance.

With safety as a major consideration, DC electricity is isolated from the 240V AC circuitry.

Designed in accordance with Australian Standard AS4763 (Int): 2006-Safety of Portable Inverters to give you
safety and peace of mind.

The unit is constructed from extruded aluminium which makes it dust proof and shock resistant. Circuit boards have been coated to protect against moisture and other elements, making them suitable for use in almost every environment.

This sophisticated inverter is perfectly suited for uses from caravans or camper trailers to trade and professional requirements.

Approximate Total Weight: 34.25kg

Thumper Specifications:

Weight: 33 Kg

Dimensions: Length 350x Width 255x Height 310mm

Inverter Specifications:

Dimensions:


Specifications:

Part No.	IP300
Input	12V DC, 30A max
No Load Current Draw	0.5A
Output	240V AC, 50Hz
Output Power	300W (continuous), 600W (peak)
Inverter Classification	Equipotentially Bonded (EPB)
Efficiency	85-90%
Low Battery Alarm	10.25V (±0.2V)
Shutdown	9.75V (±0.2V)
Cooling Fan	Automatic Temperature Controlled
Thermal Shutdown	65oC (±5oC)
Fuse	60A (2x 30A)
Ideal Battery Size	50-70Ah
Minimum Battery Size	24Ah, 200CCA
Run Time with 300W on 24Ah Battery	40min
Run Time with 100W Globe on 24Ah Battery	2 hours
Approvals	Electrical Safety, EMC
Weight	1.25kg

How to Install the in vehicle charge kit:

Installation is easy: From the Isolator attach the RED wire to the (+ Positive) terminal of your main battery, the Black Wire needs to be attached to the body of your vehicle or the earth terminal on you battery.

The BLACK wire goes to the accessories switch or wire, this is the one that makes your radio etc, turn on when you switch on the ignition. (If you don't know where this is an easy solution is to install everything else then take your vehicle to the local Auto Electrician who will wire it in for you which is a very very simple job for them and shouldn't cost more than $20.

Run the long run of cable to the back of your vehicle or wherever you want the Thumper Battery mount the socket & plug your Thumper Battery into the hella socket.

Plug in your fridge into the Thumper.

You are finished! EASY!

Of course if you need help you can call us anytime night or day on as we know how it is when you are on a mission to get your new toy fitted.

For a more detailed description of installation watch the installation videos below: