Bushpower Twin Cylinder 150psi Air Compressor

Bushpower Twin Cylinder 150psi Compressor

Twin cylinder air compressor delivers 150psi with a maximum air flow of 85L/min making it suitable for 4x4 vehicles, caravans and camper trailers.

With 3 meters of air hosing you're never going to run short, a pressure gauge is built into the hose for your convinience.

A tear resistant carry bag is included for safe and easy storage.

For safety purposes there is a flashing red emergency light and powerful LED light for night vision.

Battery clamps are also included for battery or other 12V power connection.

Also available in the Bushpower range is the 150psi Heavy Duty Compressor and the 100psi Emergency Underseat Compressor.

Voltage	12V DC
Maximum Amperage	23A
Maximum Pressure	150psi
Max Duty Cycle at 20°C, 40psi	40min
Maximum Air Flow	85L/min
Dimensions	23 x 8 x 16cm
Battery Clamp Lead Length	2.5 Metres
Air Hose Length	3 Metres
Weight	approx 4kgs

Item Scale

The below diagram is designed to give you an idea of how large this item is in relation to an average size adult man.

Item Dimensions Width: 8cm Length: 23cm Height: 16cm

Operating Instructions:

1. Always operate the compressor within the maximum pressure rating of the unit.

2. Do not run the compressir for longer than the maximum duty cycle (see specifications).

3. Ensure the compressor is off and connect to power source.

4. Attach quick disconnect coupler to air compressor.

5. Screw tyre chuck on the tyre valve (finger tight).

6. Turn the compressor on and inflate until desired pressure is reached.

7. To deflate tyre gently unscrew the tyre chuck until air is heard being released continue until the desired pressure is reached and disconnect tyre chuck.

8. To gain an accurate pressure reading from the in-line pressure gauge the air compressor should be off.

Operating the LED light:

The light switch is located next to the main on/off switch, to turn on main LED light push the switch to the "1" position, to operate the flashing red LED push the switch to the "=" position.